Переведите БЕЗ ПЕРЕВОДЧИКА A car panel is мейд by three methods.
Переведите БЕЗ ПЕРЕВОДЧИКА A car panel is мейд by three methods. First, sheet steel is мейд. This is done by pushing a piece of steel between two rollers, which squeeze the metal and make it longer and thinner. This method is called rolling. Not all metals can be rolled. For example, iron can not be rolled because it is too brittle. But steel can be because it is tough and malleable enough.Next, the steel is cut into a at shape. This is done by placing the sheet onto a die, and then cutting a hole in it with a punch. The method is called punching. The steel can be cut easily because it is now very thin. Finally, the sheet steel is bent and pressed into a rounded shape. This is done by putting the sheet onto a die and then bending the sheet around the die with a press. This method is called pressing. It is not difficult to press sheet steel because it is thin and malleable.
Задать свой вопрос-
Вопросы ответы
Статьи
Информатика
Статьи
Математика.
Физика.
Геометрия.
Разные вопросы.
Обществознание.
Математика.
Химия.
Русский язык.
Разные вопросы.
Разные вопросы.